Phone (800) 323-0972 for your nearest Clausing distributor
 

 




The World’s Finest CNC Combination Lathes
Alpha Model Series Common Features Manual Guide i

Tooling Systems

Power Charts

Specifications

Dimensions & Weights

 
Specifications for CNC6000, CNC7000
 

Model

CNC6000/80XS
CNC6000/120XS
CNC6000/160XS

CNC7000/80XS
CNC7000/120XS
CNC7000/160XS

Capacity 

Swing over bed

31.50" (800mm)

40" (1000mm)

Swing over cross slide

20.47" (520mm)

27.9" (710mm)

Swing in gap

34.25" (870mm)

51.18" (1300mm)

Gap width in front of faceplate

13.38" (340mm)

15.35" (390mm)

Construction                 

 

 

Width of cross slide

11.81" (300mm)

11.81" (300mm)

Type of cross slide ways

Dovetail

Dovetail

Type of bed ways

V and flat ways

V and flat ways

Spindle 

Spindle nose standard

D1-11

D1-11

Spindle bore standard

4.1" (105mm)

4.1" (105mm)

Spindle speed range standard

18-1400 rpm

18-1400 rpm

Spindle nose option #1

A2-11

A2-11

Spindle bore option #1

6.1" (155mm)

6.1" (155mm)

Spindle speed range option #1

18-1000 rpm

18-1000 rpm

Spindle nose option #2

A2-15

A2-15

Spindle bore option #2

9.8" (250mm)

9.8" (250mm)

Spindle speed range option #2

18-600 rpm

18-600 rpm

Spindle nose option #3

A2-20

A2-30

Spindle bore option #3

12" (305mm)

12" (305mm)

Spindle speed range option #3

18-400 rpm

18-400 rpm

Spindle nose option #4

A2-20

A2-30

Spindle bore option #4

14.9" (380mm)

14.9" (380mm)

Spindle speed range option #4

18-350 rpm

18-350 rpm

Speed ranges automatically selected 

4

4

Spindle drive

Variable AC

Variable AC

Spindle motor (Continuous/30 min)

30/35 hp (22/26kW)

30/35 hp (22/26kW)

Minimum spindle speed for full power

56 rpm

69 rpm

Power consumption

32 KVA

32 KVA

Axis  

Cross slide travel (X axis)

21.6" (550mm)

21.6" (550mm)

X-axis rapid traverse - guards closed

196"/min (5000mm/min)

196"/min (5000mm/min)

X and Z-axis feed rate (inch)

.001-.024/rev

.001-.024/rev

X and Z--axis feed rate (mm)

.03-.6mm/rev

.03-.6mm/rev

X-axis ballscrew

1.57" (40mm)

1.57" (40mm)

Z-axis rapid traverse

393.7"/min (10000mm/min)

393.7"/min (10000mm/min)

Z-axis ballscrew

2.48" (63mm)

2.48" (63mm)

Positioning accuracy

±0.0002" (.005mm)

±0.0002" (.005mm)

Repeatability

±0.0001" (.0025mm)

±0.0001" (.0025mm)

Tailstock 

Tailstock taper

6MT

6MT

Tailstock quill diameter

4.13" (105mm)

4.13" (105mm)

Tailstock quill travel

10.8" (275mm)

10.8" (275mm)

Workpiece capacity and machinable lengths and diameters will vary and may be reduced below maximum depending on workholding and tooling used.

Not all the features described in the brochure are relevant to all machines in the range.
*HEAVY DUTY SINGLE GUARD INTERLOCKED TO THE SADDLE

Return to top
 

 

[CNC] [Drills] [Lathes] [Grinders] [Mills] [Saws] [Fabricating]

Clausing Machine Tools in the Machine Shops of:
         
To Build a Winning Race Car... You Need Precision Machine Tools!

A 

Company.

 Clausing Industrial, Inc.  © 2005
1819 N. Pitcher Street
Kalamazoo, MI 49007-1886
Phone: 800-323-0972 FAX: 269-345-5945

Service Center Goshen Indiana
811 Eisenhower Drive South
Goshen, IN 46526
Phone: 800-535-6553 FAX: 574-533-0403

Last modified: June 20, 2007

Information in this document is subject to change without notice.  Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.