Specification

      T2

T4/T6M/MS

T8/M/MS/T10/M

Bar Capacity

Round inch

.23"-1.65"
(6-42mm)

.23"-2.04"
(6-54mm)

.23"-2.59"
(6-66mm)

Hexagonal A/F Max

1.41"(36mm)

1.77"(45mm)

2.20"(56mm)

Square A/F Max

1.14"(29mm)

1.41"(36mm)

1.77"(45mm)

Maximum length of bar stock

39.37"(1000mm) (T2/T4)
43.3"(1100mm) (T6/T8/T10)

Material rack capacity

1"(25mm) - 20 pieces
1.5"(45mm) - 12 pieces
2.5"(65mm) - 7 pieces

3 Push Rod diameters

.23"(6mm), .39"(10mm), .71"(18mm)

Master liner

For supporting bar stock in headstock spindle

Feed/load

Bar feed to spindle liner

Full positioning by integral servo drive

Bar load to guide vee

Electrically driven multi-vee pick and place from adjustable table

Bar stock preparation

Chamfer not required - de-burr only

Bar guide within spindle

.0197"(.05mm) -.0394"(1mm) clear support bushings or liners

Vee guide adjustment

Manual unclamp/clamp lever with handwheel height adjustment

Total working travel

46.69"(118mm)

Bar pusher rapid traverse rate

Same as lathe

Programming

Programming pages on G.E.Fanuc 21i/18i TB for operation and unmanned running including height adjustment

Overall dimensions

66.9"(170mm) L x 40.2"(102mm) W x 46.1"(117mm) H