| Coolant System
15" & 20" models |
 No.
7044 Coolant System. 5 gallon capacity, 110 volt, 60 cycle
single-phase motor, for single spindle drills. Flexible nozzle
with regulator valve, plastic hose, clamps, fittings, cord and
plug. 18 lb.
No. 2350
Coolant System. For two (2) spindle drills. 5 gallon
capacity, 110 volt, 60 cycle single-phase motor. Complete with
all valves, hose, fittings, cord and plug.
No. 2351 Coolant System. For three (3) spindle drills. Like
No. 2350 except arranged for 3 spindles.
No. 2352 Coolant System. For four (4) spindle drills. Like
No. 2350 except arranged for 4 spindles.
No. 2353 Coolant System. For five (5) spindle drills. 2-5
gal. tanks, 10 gallon capacity, 110 volt, 60 cycle, single-phase
motor. Complete with all valves, hose, fittings, cord and plugs.
No. 2354 Coolant System. For six (6) spindle drills. Like
No. 2353 except arranged for 6 spindles.
No. 2355 Coolant System. For seven (7) spindle drills. Like
No. 2353 except arranged for 7 spindles.
No. 2356 Coolant System. For eight (8) spindle drills. Like
No. 2353 except arranged for 8 spindles. |
|
Return to Top
|
| Drill
Chuck and Arbor |
 |
No. 1897
Key-Type Chuck. Takes 3/16" to 3/4" drills. Adapts to 3 MT
spindle with No. 1898 arbor. 4 lbs. 20" models
No. 1898 Arbor. Adapts No. 1897 to 3 MT spindle. 1 lb. 20"
models
No. 40-60 Key-Type Chuck. Takes No. 70 to 1/2" drills.
Adapts to No. 2 MT spindle with No. 378 arbor. 2 lbs. 15" models
No. 378 Arbor. Adapts No. 40-60 to No. 2 MT spindle. 1 lb.
15" models |
|
Return to Top
|
| Drill Press
Lamp |
No. 7022 Lamp.
Cool
burn-proof shade, aluminum reflector, switch, 19" flexible arm,
magnetic base, 6' cord and plug. For 15" and 20" Models |
|
|
|
Head or Table
Positioning Mechanism |
No. 1613
Positioning Mechanism for 15" models.
For head or
table on floor models, head only on multiple spindles drills.
One revolution of crank gives 1/8" travel, maximum travel at one
setting, 10". Installed when ordered with drill from factory. 16
lbs. |
|
Return to Top
|
| Head
Positioning Mechanism |
No. 2216
Positioning Mechanism, for 20" models
Maximum travel,
one setting, 10". Head swivels on ball race in support collar.
Installed when ordered with drill from factory. 16 lbs. |
| |
| Mesh Guard |
No. SK-208
Top Mesh Belt Guard, 20" models
No. SK-101 Top Mesh Belt Guard, 15" models |
|
Return to Top
|
| Columns |
|
15" Drill
Presses
No. 1693 Column 42" x 3" 18 lb.
No. 1694 Column 65" x 3" 32 lb.
No. 1749 Column 90" x 3" 64 lb.
20" Drill
Presses
No. 2293 Column 43" x 4" x 1/2" wall 78 lb.
No. 2294 Column 66" x 4" x 1/2" wall 121 lb.
No. 2349 Column 90" x 4" x 1/2" wall 160 lb. |
|
Return to Top
|
|
Electric Foot Control |
|
 No.
302 Electric Foot Control
No. 302R1 Electric Foot Control with reversing drum switch for
single speed drill
No. 302R2 Electric Foot Control with replacement reversing drum
switch for two speed drills
Start and stop
drill from foot pedal, reverse spindle from reversing drum
switch for 15" and 20" Models |
|
