Clausing/Ibarmia Series P Drills

BP70L

All series P models are supplied with side protection panels with front doors except those equipped with a cross table

View of left side of machine head showing lifting equipment, stroke microswitches and automatic lubrication pump for the guides.

CLAUSING/Ibarmia Series P Drills
Geared-drive Prismatic-column Drills

With Electromagnetic Clutch Automatic Feed Control

The P series Industrial Drilling Machines are built with a extra heavy-duty base and worktable to handle large and heavy work pieces.

Standard features & equipment

Optional equipment

Capacities, Specifications & Dimensions

Standard features and equipment:

Drilling capacity in steel: 2.75" (70mm) maximum
Drilling capacity in cast iron: 3.14" (80mm) maximum
Tapping capacity in steel: 2.51" (64mm) maximum
Tapping capacity in cast iron: 2.68" (68mm) maximum
Automatic feed reversing system for tapping on “RS” models
Adjustable of vertical position of head by geared-motor
Large worktable with 3 T-slots
Hardened and ground high quality steel gears
Gear box lubrication by automatic pump
Guide ways lubricated by manual pump
Speed plate and selecting levers on front of head
Coolant tank and pump in machine base
Automatic feed and cut-off by electromagetic clutch
Work light
Front hand wheel for fine feed work
Depth scale and adjustable depth stop
Built-in low voltage electrical equipment in column rear
Emergency STOP
Automatic tool ejector
Forward and reverse turn push buttons
Drill guard with microswitch

Optional equipment:

Automatic pitch control tapping with single speed brake motor
Automatic pitch control tapping with pneumatic rapid approach
Master guide spindle and nut set for automatic pitch control tapping
Pneumatic counterbalance with rapid approach and retract
Pneumatic counterbalance with rapid approach and retract for tube and profile drilling
Pneumatic counterbalance with rapid approach and retract with pitch controlled tapping
50% lower feed range
Mechanical spotface device
Pneumatic counterbalance
Multi-spindle head guide rod
Union, dragging cone and assembly for multi-spindle head
START-STOP and emergency STOP pendent control
Pendant control panel with all functions
Cross slide table
ISO-40 spindle with quick change nut (models BP-40, 50, 70)
ISO-50 spindle with quick change nut (models BP-70 only)

Capacities, Specifications and Dimensions

Standard Models	BP-40	BP-50/50L	BP-70/70L
Auto feed reversing for tapping Models	BP-40RS	BP-50RS/50LRS	BP-70RS/70LRS
Capacities:
Maximum drilling capacity in steel	1.57" (40mm)	1.97" (50mm)	2.76" (70mm)
Maximum drilling capacity in cast iron	1.97" (50mm)	2.36" (60mm)	3.14" (80mm)
Maximum tapping capacity in steel	1.30" (33mm)	1.65" (42mm)	2.51" (64mm)
Maximum tapping capacity in cast iron	1.57" (40mm)	1.97" (50mm)	2.68" (68mm)
Specifications:
Spindle taper	4MT	4MT	5MT
Spindle taper (optional upon request)	ISO-30	ISO-40	ISO-40/50
Quill diameter	2.95" (75mm)	3.46" (88mm)	3.54" (90mm)
Spindle travel (drilling depth)	7.87" (200mm)	9.06" (230mm)	10.24" (260mm)
Main motor power	3Hp (2.2Kw)	5.5Hp (4Kw)	10Hp (7.3Kw)
Coolant pump motor power	.12Hp (.09Kw)	.12Hp (.09Kw)	.12Hp (.09Kw)
Head geared-motor power	1Hp (.7Kw)	1.5Hp (1.1Kw)	1.5Hp (1.1Kw)
Number of speed (see speed charts)	9	9	12
Number of automatic feeds	3	6	6
Auto feed range in./rev. (mm/rev)	.0039/.0079/.0118 (.1/.2/.3)	.0039/.0079/.118/.157/.197/.236 (.1/.2/.3/.4/.5/.6)
Dimensions and Weights
Height (A)	85.8" (2180mm)	97.2/122.8" (2470/3120mm)	103.1/122.8" (2620/3120mm)
Base length (B)	52" (1320mm)	55.9/58.6" (1420/1490mm)	62.6/64.6" (1590/1640mm)
Spindle to Table (C)
Minimum	7.09" (180mm)	11.02/25.6" (280/650mm)	9.06/23.6" (230/6000mm)
Maximum	33.07" (840mm)	39.4/64.9" (1000/1650mm)	43.3/63" (1100/1600mm)
Spindle center to column (D)	15.75" (400mm)	18.7" (475mm)	20.67" (525mm)
Maximum head height (E)	96.5" (2550mm)	108.3/133.9" (2750/3400mm)	120.1/139.8" (3050/3550mm)
Worktable width (F)	19.69" (500mm)	23.62" (600mm)	27.56" (700mm)
Table height (G)	27.56" (700mm)	27.56" (700mm)	27.56" (700mm)
Worktable length (H)	23.62" (600mm)	27.56" (700mm)	35.43" (900mm)
Overall width (I)	35.43" (900mm)	39.37" (100mm)	47.24" (1200mm)
Net weight	2,425 lbs (1100Kg)	3,086/3,527 lbs (1400/1600Kg)	4,078/4,629 lbs (1850/2100Kg)
Shipping weight	2,866 lbs (1300Kg)	3,527/4,078 lbs (1600/1850Kg)	4,630/5,291 lbs (2100/2400Kg)
Shipping dimension (length x width x height)	40" x 55" x 91" (1x1.4x2.3m)	48" x 107/130" x 79" (1.2x2.7/3.3x2m)	56" x 111/130" x 79" (1.4x2.8/3.3x2m)

Standard motor: 1800 rpm

Model	Spindle speeds (rpm)
BP-40	95-135-190 267-380-534 750-1065-1500
BP-50/50L	66-91-133 206-288-418 617-866-1255
BP-70/70L	62-81-104-133 191-250-321-410 532-683-878-1120

“RS” models are equipped with automatic feed reversing system for tapping.

Optional spindle motors

Model	Motor	Speed range
BP-40	1200 rpm	63-1000 rpm
BP-40	3600 rpm	190-3000 rpm
BP-40	900/1800 rpm	47-1500 rpm
BP-40	1800-3600 rpm	95-3000 rpm
BP-50/50L	1200 rpm	46-878 rpm
BP-50/50L	3600 rpm	132-2510 rpm
BP-50/50L	900/1800 rpm	33-1255 rpm
BP-50/50L	1800-3600 rpm	33-2510 rpm
BP-70/70L	1200 rpm	40-748 rpm
BP-70/70L	3600 rpm	124-2440 rpm
BP-70/70L	900/1800 rpm	31-1120 rpm
BP-70/70L	1800-3600 rpm	62-2240 rpm

Return to top

Clausing Machine Tools in the Machine Shops of:

To Build a Winning Race Car... You Need Precision Machine Tools!
A Company.	Clausing Industrial, Inc. © 2005 1819 N. Pitcher Street Kalamazoo, MI 49007-1886 Phone: 800-323-0972 FAX: 269-345-5945	Service Center Goshen Indiana 811 Eisenhower Drive South Goshen, IN 46526 Phone: 800-535-6553 FAX: 574-533-0403
Last modified: June 20, 2007	Information in this document is subject to change without notice. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.