Phone (800) 323-0972 for your nearest Clausing distributor
 
ibarmia logo-1w.gif (1476 bytes) CLAUSING/Ibarmia Series T/Z/X/A/B
Round-column Optional Equipment

Model

Description:

7044

Coolant System with separate tank  (all models)

7022

Worklight with magnetic base  (all models)

PST

Cycle or spindle turn START foot pedal

PSR

Spindle reverse foot pedal  (for tapping)

MCC-KT

Cross Slide Table 13.8" x 10.8"  (K/T Series)

MCC-ZX

Cross Slide Table 15" x 8.7"  (Z/X Series)

MCC-X40

Cross Slide Table 15" x 8.7"  (X40 Series)

MB-5D

Cross Slide Table 16" x 12"  (X model 35/A/B Series)

Series T

 (Factory Installed only)

MG-T

Rotating table

PKA

Floor Cabinet with 2 shelves

PKB

Floor Cabinet with door and drawer

Series Z

 (Factory Installed only)

MG-Z

Rotating table

MGI-Z

Tilting Rotating Table

TAK-Z

Digital rpm read-out  (V models only)

UC-Z

Union, dragging cone and assembly for multi-spindle head

Series X

 (Factory Installed only)

MG-X

Rotating table  (X-32 Models)

MGI-X

Tilting Rotating Table

RPF-X

Automatic pitch controlled tapping with single speed brake-motor

RPF-ANR-X

Automatic pitch controlled tapping with pneumatic rapid approach

HGP-X

Master guide spindle and nut set for  automatic pitch controlled tapping

UC-X

Union, dragging cone and assembly for multi-spindle head

Series A/B

 (Factory Installed only)

RPF-A

Automatic pitch controlled tapping with single speed brake-motor

RPF-ANR-A

Automatic pitch controlled tapping with pneumatic rapid approach

HGP-A

Master guide spindle and nut set for  automatic pitch controlled tapping

ACNL-B

Pneumatic counterbalance with rapid approach and retreat

ACNL-S-B

Pneumatic counterbalance with rapid approach  and retreat for tube and profile drilling

ACNL-RPF-B

Pneumatic counterbalance with rapid approach  and retreat with controlled tapping

AR-A

50% lower feed rate range

DLM-A

Mechanical spotface device

CN-A

Pneumatic counterbalance for spindle return

UC-A

Union, dragging cone and assembly for multi-spindle head

GM-A

Multi-spindle head guide rod

PM-B

Start-stop and emergency stop pendent control

SC-B

8" column riser

 

  
MG
Rotating table with 3 T-slots.  (for series Z/X-32 models standard on all other models)


PST
Cycle or spindle turn START foot pedal

PSR
Spindle reverse foot pedal  (for tapping)


TAK
Digital rpm display.  (for series Z-V models)


RPF
Automatic pitch controlled tapping with single speed brake-motor.  (for series X/A/B models)

  
MGI
Rotating table with 3 T-slots and tilting support.  (for series Z/X/A/B models)


RS
Automatic feed reversing system for tapping.  (standard on series T/Z/X/A/B-RS models)

 
RPF-ANR
Automatic pitch controlled tapping with pneumatic rapid approach.  (standard on series X/A/B models)


 

ACNL
Pneumatic counterbalance for automatic drilling cycle with rapid approach, working feed and rapid retract. 
(for series B models)

ACNL-S
Pneumatic counterbalance for automatic drilling cycle with two rapid approaches, and rapid retract, for tube and profile drilling.  (for series B models)

 

Assembly for Multi-Spindle Heads

ACNL

Automatic drilling cycle with rapid approach, working feed and rapid retract, with additional pneumatic counterweight function for the multi-spindle head.
   

UC

Union, dragging cone and assembly of the multi-spindle head.
   

CM

Multi-spindle head with fixed or adjustable spindle.
   

GM

Multi-spindle head guide rod.
   

PM

START/STOP and emergency STOP control extension.
   

SC

8" column riser for greater distance between spindle nose and Worktable

 
Return to top
 

 

Cross Slide Tables

Series K/L

MCC-KT 13.8" x 10.8" Cross Slide Table
for KL & TL models

  

Series X/Z

MCC-XZ 15" x 8.7" Cross Slide Table
for X32/34 & Z32/34 models
     

Series K/L

MCC-X40 15" x 8.7" Cross Slide Table
for X40 & Z40 Models

  

Series K/L

MB-5D 18.5" x 11.8" Cross Slide Table
for A, B & C models

 
Return to top
 

 

 

[CNC] [Drills] [Lathes] [Grinders] [Mills] [Saws] [Fabricating]

Clausing Machine Tools in the Machine Shops of:
         
To Build a Winning Race Car... You Need Precision Machine Tools!

A 

Company.

 Clausing Industrial, Inc.  © 2005
1819 N. Pitcher Street
Kalamazoo, MI 49007-1886
Phone: 800-323-0972 FAX: 269-345-5945

Service Center Goshen Indiana
811 Eisenhower Drive South
Goshen, IN 46526
Phone: 800-535-6553 FAX: 574-533-0403

Last modified: June 20, 2007

Information in this document is subject to change without notice.  Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.