Clausing/Ibarmia Series X34/40 Drills

BX40

On the X34/40, Speed Selector Levers are mounted on the front of the headstock for operator convenience and fast and easy speed selection.

The ABZ34/40 & ABX34/40 are equipped with a 3 feed rate, Mechanical Clutch Automatic Feed Control, the feed rate is easily selected by the Feed Selector.

CLAUSING/Ibarmia Series X34/40 Drills
Geared-drive Round-column Drills

With Manual, Mechanical Clutch or Electromagnetic Clutch Feed Control

The X series range of easy to operate Industrial Drilling Machines offer a variety of capacities and feeds. Engineered for a long work life the X series drills are a great value.

SX models are equipped with manual feed, AX models are equipped with a mechanical clutch automatic feed control and the BX models are equipped with electromagnetic automatic feed control.

Standard features & equipment

Optional equipment

Capacities, Specifications & Dimensions

Standard features and equipment:

Drilling capacity in steel: up to 1.57" maximum
Drilling capacity in cast iron: up to 1.77" maximum
Tapping capacity in steel: up to 1.30" maximum
Tapping capacity in cast iron: up to 1.54" maximum
Automatic feed reversing system for tapping on “RS” models
Hardened and ground high quality steel gears
Speed plate and selecting levers on front of head
Gear box lubrication by automatic pump
Machine base with 2 T-slots, coolant tank and pump
Large rotating worktable with 3 T-slots,
Feed crank wheel for manual feed
Depth scale and adjustable depth stop
Automatic tool ejector
Work Light
Built-in low voltage electrical equipment in machine head
Emergency STOP
Drill guard with microswitch

Optional equipment:

Rotating table and tilting support
Automatic pitch control tapping with single speed brake motor
Automatic pitch control tapping with pneumatic rapid approach
Master guide spindle and nut set for automatic pitch control tapping
Union, dragging cone and assembly for multi-spindle heads
Wheeled-base
Cross slide table
Cycle start foot pedal
Foot pedal for reversing
Worklight with magnetic base
Coolant system with independent container

Optional Cross Slide Table

An optional MGM Rotating Table with 3 T-slots on one side and a vise on the other side, for Z34 & X34
Models

Capacities, Specifications and Dimensions

Standard Models	SX/AX/BX34	SX/AX/BX40
Auto feed reversing for tapping Models	SX/AX/BX34RS	SX/AX/BX40RS
Capacities:
Maximum drilling capacity in steel	1.34" (34mm)	1.57" (40mm)
Maximum drilling capacity in cast iron	1.57" (40mm)	1.77" (45mm)
Maximum tapping capacity in steel	1.06" (27mm)	1.30" (33mm)
Maximum tapping capacity in cast iron	1.18" (30mm)	1.18" (30mm)
Specifications:
Spindle taper	4MT	4MT
Quill diameter	2.95" (75mm)	2.95" (75mm)
Spindle travel (drilling depth)	5.9" (150mm)	7.09" (180mm)
Main motor power	2Hp (1.5Kw)	3Hp (2.2Kw)
Coolant pump motor power	.1Hp (.07Kw)	.1Hp (.07Kw)
Number speeds	9	9
Number of automatic feeds	3	3
Auto feed range: in./rev. (mm/rev)	.0039/.0079/.0118 (0.1-0.2-0.3)	.0039/.0079/.0118 (0.1-0.2-0.3)
Dimensions and Weights
Height (A)	86.4" (2195mm)	90" (2285mm)
Base: length x width (B)	29.1" x 16.2" (740 x 412mm)	31.5" x 18.8" (800 x 476mm)
Base to spindle (C)	48.4" (1230mm)	48.4" (1230mm)
Spindle center to column (D)	11.81" (300mm)	13.78" (350mm)
Spindle to Table (E)
Minimum	1.97" (50mm)	1.97" (50mm)
Maximum	28.5" (725mm)	27.2" (690mm)
Worktable: length x width (F)	15.75" x 18.9" (400 x 480mm)	18.9" x 22.05" (480 x 560mm)
Base height (G)	4.72" (120mm)	4.72" (120mm)
Column diameter (H)	4.92" (125mm)	5.91" (150mm)
Net weight	882 lbs (400Kg)	1,081 lbs (490Kg)
Shipping weight	450 lbs (992Kg)	1,190 lbs (540Kg)
Shipping dimension (l x w x h)	92" x 24" x 42" (2.34x.61x1.06m)	92" x 24" x 42" (2.34x.61x1.06m)

Standard motor: 1800 rpm

Spindle speeds SX/AXBX-34 & SX/AXBX-40

158-233-332-383-559-799-1060-1555-2222 rpm

Standard Fixed Table Models

Model	Description
1SX-34	23.6" (600mm) drill with Fixed Table
1SX-34RS	23.6" (600mm) drill with Fixed Table and Tapping System
1AX-34	23.6" (600mm) drill with Fixed Table
1AX-34RS	23.6" (600mm) drill with Fixed Table and Tapping System
1BX-34	23.6" (600mm) drill with Fixed Table
1BX-34RS	23.6" (600mm) drill with Fixed Table and Tapping System
1SX-40	27.5" (700mm) drill with Fixed Table
1SX-40RS	27.5" (700mm) drill with Fixed Table and Tapping System
1AX-40	27.5" (700mm) drill with Fixed Table
1AX-40RS	27.5" (700mm) drill with Fixed Table and Tapping System
1BX-40	27.5" (700mm) drill with Fixed Table
1BX-40RS	27.5" (700mm) drill with Fixed Table and Tapping System

“RS” models are equipped with automatic feed reversing system for tapping.

Return to top

Clausing Machine Tools in the Machine Shops of:

To Build a Winning Race Car... You Need Precision Machine Tools!
A Company.	Clausing Industrial, Inc. © 2005 1819 N. Pitcher Street Kalamazoo, MI 49007-1886 Phone: 800-323-0972 FAX: 269-345-5945	Service Center Goshen Indiana 811 Eisenhower Drive South Goshen, IN 46526 Phone: 800-535-6553 FAX: 574-533-0403
Last modified: June 20, 2007	Information in this document is subject to change without notice. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.