Clausing Radial Drill CL1600H

Heavy-Duty, Large Capacity Radial Drills

Models
CL1600H

Features & Standard Equipment

Equipped with hydraulic SEPARATE clamping unit. Vertical movement of arm is coordinated by an IC TIMER. With a single touch on push button switch, you can have arm unclamped then move vertically, or stop then clamp automatically. Very easy to operate, and tools will always stay at the same point after tool shifting.
Gears in gear box are cooled by oil cycled by an oil pump to minimize gear wear.
Friction type disc clutch absorbs impact force caused by vertical movement of spindle, and protects all transmission units inside gear box. With quick spindle return, the clutch will help speed-up the tapping operation.
Special automatic tool eject device is supplied to allow you to change tools quickly. (No drifter is required)
Special arm elevating device is provided to prevent arm from falling down abruptly after years of usage.
Coolant System
Tool kit and manuals

Specifications

Model			CL1600H*
Working Area
	Column Sleeve Dia (E)		17" (432mm)
	Column Face to Spindle Center
		Maximum (D+C)	62.2" (1580mm)
		Minimum (D)	17.3" (440mm)
	Spindle Head Travel (C)		44.9" (1140mm)
	Base Surface to Spindle End
		Maximum (A)	63" (1600mm)
		Minimum (B)	15" (380mm)
	Arm Vertical Travel (A-B)		33.5" (850mm)
	Arm Rotation (Right & Left)		180°
	Baseplate Working Surface		70.9"x 39.4" (1800mmx1002mm)
	Box Table Area
		Length (L)	27.6" (700mm)
		Width (K)	19.7" (500mm)
		Height (H)	15.7" (400mm)
	Base Dimensions
		Floor Area (R x S)	97.6"x41.3" (2480mmx1050mm)
		Height (Q)	8.26" (210mm)
Drilling Head
	Spindle Taper		MT#5
	Spindle Stroke		14.6" (370mm)
	Quill Diameter		3.94" (100mm)
	Number of Spindle Speeds		12
	Spindle Speeds (rpm)		40-1920
	Number of Steps		6
	Spindle Feed Rate (in(mm)/rev.)		0.003"(.07mm)-0.038"(.96mm)
	Spindle Drive Motor (2-speed)		7.5 hp (5.6 Kw)
	Elevating Motor		2 hp (1.5 Kw)
	Clamping Motor		1 hp (.75 Kw)
	Coolant Pump Motor		1/8 hp (.10 Kw)
Overall Measurements and Weight
	Max. Machine Height (F)		124.8" (3170mm)
	Base and Column Height (G)		104.7" (2660mm)
	Shipping Dim.
		Length	112.2" (2850mm)
		Width	55.1" (1400mm)
		Height	115.7" (2940mm)
	Net Weight		10,141 lbs (4600kg)
	Shipping Weight		11,243 lbs (5100kg)

* Consult price list for transportation cost.

Dimensions

Return to top

Capacities

Clausing Machine Tools in the Machine Shops of:

To Build a Winning Race Car... You Need Precision Machine Tools!
A Company.	Clausing Industrial, Inc. © 2005 1819 N. Pitcher Street Kalamazoo, MI 49007-1886 Phone: 800-323-0972 FAX: 269-345-5945	Service Center Goshen Indiana 811 Eisenhower Drive South Goshen, IN 46526 Phone: 800-535-6553 FAX: 574-533-0403
Last modified: February 22, 2007	Information in this document is subject to change without notice. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.