Phone (800) 323-0972 for your nearest Clausing distributor
 

 

Specifications   Dimensions   Standard Features   Optional Equipment
 
Specifications

 

13" VS

15" VS

18" VS

21" VS

Capacity

Height of center

6.7" (170mm)

7.67" (195mm)

9" (229mm)

11.02" (280mm)

Swing over bed

13.75" (350mm)

15.75" (400mm)

18.1" (460mm)

21.81" (554mm)

Swing in gap

21" (533mm)

23" (584mm)

28.74" (730mm)

32.68" (830mm)

Width in front of faceplate

6.5" (165mm)

6.5" (165mm)

8.5" (216mm)

8.5" (216mm)

Swing over cross slide

7.75" (197mm)

9.75" (248mm)

10.62" (216mm)

14.57" (370mm)

Bedway width

12.5" (318mm)

12.5" (318mm)

15.75" (400mm)

15.75" (400mm)

Headstock

Spindle bore

1.65" (42mm)

2.12" (54mm)

3"
(76mm)

4.09" (104mm)

Spindle nose (camlock)

D1-4

D1-6

D1-8

D1-11

Spindle nose taper

3MT

4MT

5MT

5MT

No. of spindle speeds

3

3

3

3

Spindle Speed Range (rpm)

0-3250

14-2500

20-2000

18-1800

   Low range (rpm)

17-340

15-275

20-225

18-200

   Mid range (rpm)

50-1010

45-795

60-675

55-605

   High range (rpm)

160-3250

125-2500

175-2000

100-1800

Cross/Top Slide

Travel of cross slide

9.8" (249mm)

9.8" (249mm)

11.81" (249mm)

11.81" (249mm)

Width of cross slide

7.09" (180mm)

7.09" (180mm)

8"
(203mm)

8"
(203mm)

Travel of top slide

3.9" (99mm)

5.1" (130mm)

7.5" (190mm)

7.5" (190mm)

Width of top side

3.54" (90mm)

3.93" (100mm)

6.8" (173mm)

6.8" (173mm)

Tailstock

 

 

 

 

Quill travel

5.5" (140mm)

5.5" (140mm)

7"
(178mm)

7"
(178mm)

Quill Diameter

2.48" (63mm)

2.87" (73mm)

3.74" (95mm)

3.74" (95mm)

Quill taper

4MT

5MT

6MT

6MT

Feeds and Threading

Longitudinal feed range                (in)

0.018-1.2in/rev

0.018-1.2in/rev

0.0016-0.11in/rev

0.0016-0.11in/rev

                        (mm)

.46-30mm/rev

.46-30mm/rev

.041-2.79mm/rev

.041-2.79mm/rev

Cross feed range                (in)

0.0007-0.048in/rev

0.0007-0.048in/rev

0.0008-0.055in/rev

0.0008-0.055in/rev

                        (mm)

.018-1.22mm/rev

.018-1.22mm/rev

.02-1.4mm/rev

.02-1.4mm/rev

Number of inch pitches

56

56

73

73

Range of inch pitches

2-56 TPI

2-56 TPI

2-84 TPI

2-84 TPI

Number of metric pitches

51

51

51

51

Range of metric pitches

0.2-14mm

0.2-14mm

0.2-14mm

0.2-14mm

Number of diametral pitches

20

20

27

27

Range of diametral pitches

8-56

8-56

8-72

8-72

Number of module pitches

51

51

51

51

Range of module pitches

0.2-3.5

0.2-3.5

0.2-3.5

0.2-3.5

Motor

Spindle motor

10 hp (7.5kw)

10 hp (7.5kw)

15 hp (10kw)

15 hp (10kw)

Due to ongoing design improvements, specifications and design are subject to change without notice. 

 
Return to Top
 

 

Models & Dimensions

Model

Swing and Center Distance

A

B

C

Weight

8016CS

13"(350mm) x 25"(635mm)

75"(1900mm)

51"(130mm)

51"(130mm)

2,790 lbs(1266kg)

8044CS

15"(400mm) x 50"(350mm)

99"(2515mm)

51"(130mm)

51"(130mm)

3,300 lbs(1497kg)

8054VS

18"(460mm) x 60"(1500mm)

120"(3000mm)

51"(130mm)

51"(130mm)

5,765 lbs(2615kg)

8116VS

21"(554mm) x 80"(2000mm)

140"(3556mm)

51"(130mm)

51"(130mm)

6,283 lbs(2850kg)

8119VS

21"(554mm) x 120"(3000mm)

180"(4572mm)

51"(130mm)

51"(130mm)

7,960 lbs(3611kg)

 
 
Return to Top
 

 

Standard Features

  • Standard Features:

  • Spindle Center Bushing

  • Two MT Centers

  • Splash Guard

  • Chuck Guard

  • Leadscrew Cover

  • Coolant System

  • Inch Threading Dial

  • Set of Wrenches and Keys

  • Instruction and Parts Manual

  • Accuracy Chart

  • Emergency Stop Button

  • Lockable Isolator Switch

  • One Shot Saddle and Cross Slide Lubrication

  • Rapid Power Traverse to Cross Slide and Carriage (18" & 21" models)

  • Saddle Mounted Controls and Power Meter (18" & 21" models)

  • Forward/Reverse/Stop Switch

  • 208/230 v. or 460 v. 3 ph 60Hz
 
Return to Top
 

 

Optional Equipment

  • Quick Change Toolpost

  • Quick Change Rear Toolpost

  • Turret Tool Post

  • Full Range of Chucks

  • Hi-speed Threading Attachment

  • Live Center

  • Drive Plate

  • Face Plate

  • Work Light

  • Telescopic Taper Attachment

  • Follower Rest - Plain and Roller Fingers

  • Steady Rest - Plain and Roller Fingers

  • Single and 5 Position Bedstop

  • 2 and 3 axis DRO, or CSS DRO for All Bed Lengths
 
Return to Top
 

 

 

[CNC] [Drills] [Lathes] [Grinders] [Mills] [Saws] [Fabricating]

Clausing Machine Tools in the Machine Shops of:
         
To Build a Winning Race Car... You Need Precision Machine Tools!

A 

Company.

 Clausing Industrial, Inc.  © 2005
1819 N. Pitcher Street
Kalamazoo, MI 49007-1886
Phone: 800-323-0972 FAX: 269-345-5945

Service Center Goshen Indiana
811 Eisenhower Drive South
Goshen, IN 46526
Phone: 800-535-6553 FAX: 574-533-0403

Last modified: February 22, 2007

Information in this document is subject to change without notice.  Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.