Phone (800) 323-0972 for your nearest Clausing distributor
 

 

 

The Ultimate Turning Machines

 

Specifications

 

Alpha 1350XS

Alpha 1400XS

Alpha 1460XS

Alpha 1550XS

Alpha 1800XS-120

Alpha 1800XS-170

Alpha 1550XM

Distance between centers

650mm (25”)

1250mm (50”)

1500mm (60”)

2000mm (80”) or 3000mm (120”)

2000mm (80”), 3000mm (120”) or 4000mm (160”)

2000mm (80”), 3000mm (120”) or 4000mm (160”)

2000mm (80”) or 3000mm (120”)

Saddle stroke Z-Axis Max

556mm (217/8”)

1156mm (451/2”)

1510mm (60”)

2010mm (791/8”)

3020mm (1187/8”)

3020mm (1187/8”)

2010mm (791/8”)

Swing over bed

350mm (133/4”)

400mm (153/4”)

460mm (183/8”)

554mm (213/4”)

800mm (311/2”)

800mm (311/2”)

554mm (213/4”)

Swing in gap

535mm (21”)

585mm (23”)

730mm (283/4”)

830mm (325/8”)

870mm (341/4”)

870mm (341/4”)

830mm (325/8”)

Gap width from faceplate

165mm (61/2”)

165mm (61/2”)

216mm (81/2”)

216mm (81/2”)

340mm (133/8”)

340mm (133/8”)

216mm (81/2”)

Swing over cross-slide

196mm (73/4”)

246mm (95/8”)

270mm (105/8”)

370mm (141/2”)

520mm (201/2”)

520mm (201/2”)

370mm (141/2”)

Spindle bore

42mm (15/8”)

55mm (21/8”)

78mm (31/16”)

104mm (41/8”)

120mm (43/4”)

170mm (63/4”)

104mm (41/8”)

Spindle nose

Camlock D1-4”

Camlock D1-6”

Camlock D1-8”

Camlock D1-11”

Camlock D1-11”

A2-11”

Camlock D1-11”

Taper in nose bush

No. 3 MT

No. 4 MT

No. 5 MT

No. 5 MT

N/A

N/A

No. 5 MT

Spindle speeds:

Low range

1 to 366rpm

1 to 297rpm

1 to 247rpm

1 to 224rpm

15 to 611rpm

10 to 407rpm

1 to 224rpm

Medium range

1 to 1088rpm

1 to 861rpm

1 to 740rpm

1 to 672rpm

N/A

N/A

1 to 672rpm

                         High range

1 to 3500rpm

1 to 2700rpm

1 to 2200rpm

1 to 2000rpm

40 to 1500rpm

25 to 1000rpm

1 to 2000rpm

Main motor

7.5kW (10HP)

7.5kW (10HP)

11kW (15HP)

11kW (15HP)

26kW (35HP)

26kW (35HP)

11kW (15HP)

Constant power range

86-3500rpm

69-2700rpm

67-2200rpm

64-1970rpm

153-1500rpm

102-1000rpm

64-1970rpm

Tailstock quill travel

140mm (53/4”)

140mm (51/2”)

145mm (55/8”)

145mm (55/8”)

210mm (81/4”)

210mm (81/4”)

145mm (55/8”)

Tailstock quill diameter

63mm (21/2”)

73mm (27/8”)

95mm (33/4”)

95mm (33/4”)

120mm (43/4”)

120mm (43/4”)

95mm (33/4”)

Tailstock taper

No. 4 MT

No. 5 MT

No. 6 MT

No. 6 MT

No. 6 MT

No. 6 MT

No. 6 MT

Electrical supply required

22kVA

22kVA

24kVA

24kVA

32kVA

32kVA

24kVA

Floor to spindle centre

1061mm (41”)

1086mm (42”)

1145mm (443/4”)

1195mm (463/4”)

1200mm (48”)

1200mm (471/4”)

1195mm (463/4”)

Overall length

2400mm (743/4”)

2900mm (101”)

1500mm (60”)

2000mm (80”) 4100mm (166”)

2000mm (80”) 4210mm (166”)

2000mm (80”) 4210mm (166”)

2000mm (80”) 4100mm (166”)


Illustrations and specifications are not binding in detail.  The designs are subject to modification and improvement without notice.

Workpiece capacity and machinable lengths and diameters will vary and may be reduced below maximum depending on workholding and tooling used.  

Not all the features described in the brochure are relevant to all machines in the range.

C-Axis for 1550XM

Motor
max torque

4Nm

Output max torque

152Nm

Max output speed

105rpm

Resolution

0.001°

Back to Top

[CNC] [Drills] [Lathes] [Grinders] [Mills] [Saws] [Fabricating]

Clausing Machine Tools in the Machine Shops of:
         
To Build a Winning Race Car... You Need Precision Machine Tools!

A 

Company.

 Clausing Industrial, Inc.  © 2005
1819 N. Pitcher Street
Kalamazoo, MI 49007-1886
Phone: 800-323-0972 FAX: 269-345-5945

Service Center Goshen Indiana
811 Eisenhower Drive South
Goshen, IN 46526
Phone: 800-535-6553 FAX: 574-533-0403

Last modified: February 22, 2007

Information in this document is subject to change without notice.  Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.