Clausing Metosa 13" Geared Head Lathes

Phone (800) 323-0972 for your nearest Clausing distributor

13" GEARED HEAD LATHE

The CLAUSING/METOSA 13" lathe, designed to give you years of trouble-free turning, will make a valuable addition to your tool room or machine shop ... Just Add Your Chuck and You're Ready to Turn.

Dimensions, Center Distance & Weight

Recommended Chucks

Features:
Headstock & Control Panel: The 9 speed heavy-duty headstock is fully geared. All gears are hardened and ground and run in a continual bath of oil. Our main spindle is made of forged, quenched and tempered steel, with a case hardened spindle nose and mounted on precision taper roller bearings. The control panel is designed for operator convenience and efficiency.	Bed & Bedways: The extra wide 10" bed is scientifically designed and constructed of stabilized cast iron with bedways hardened and ground to a hardness of 42 to 47 Rc. The bed is designed with tapered cross braces for fast and easy chip removal. The bed is mounted on a rigid, fabricated steel base that is specially engineered to absorb vibration and ensure smooth accurate operation.
Return to Top of Page
Micro Carriage Stop: For precision machining the Micro Carriage Stop is standard on the 13" lathe.	4-Position Bed Stop: The 4-Position Bed Stop is standard and allows fast and accurate turning of multiple lengths.
Return to Top of Page
Carriage & Apron: Easy-to-operate controls mean increased productivity. Easy-to-read dual inch and metric dials, and a quick change tool post is standard equipment on the 13" lathe.	Tailstock: An extra heavy-duty casting for maximum rigidity is equipped with a 1.9" ram with 3MT taper. The tailstock ram is marked with a graduated scale and the handwheel ring is indexed for accurate ram positioning.
Return to Top of Page

Specifications:

13"
Capacity
	Swing over bed	13.2"
	Center height	6.5"
	Swing over carriage	12.20"
	Swing over cross slide	6.89"
	Bed Width	10"
Headstock
	Spindle bore	1.65"
	Spindle nose	D1-5
	Spindle taper	4MT
	No. of speeds	9
	Spindle speed range (rpm)	60-2000*
Thread and feed box
	No. of longitudinal feeds	44
	Range (inches)	0.0018-0.026
	No. of cross feeds	44
	Range (inches)	0.0005-0.0076
	No. of Metric Threads	44
	Range (mm)	0.5-7.5
	No. of Inch Threads	44
	Range (t.p.i.)	4-60
	No. of modular threads	44
	Range	0.25-3.75
	No. of diametral	44
	Range	8-120
	Leadscrew dia./TPI	1.26"/4
Slides and carriage
	Cross slide travel	9.65"
	Top slide travel	4.72"
	Max. Tool Size	5/8" x 5/8"
Tailstock
	Tailstock ram diameter	1.9"
	Tailstock ram travel	5.51"
	Tailstock taper	3MT
Motors
	Spindle motor (Hp)	3
	Pump motor (Hp)	3/4

*Spindle speed, (rpm)
60 - 115 - 175 - 275 - 450
660 - 1,075 - 1,750 - 2,000

(specifications subject to change without notification)

Return to Top of Page

Standard Equipment:
Dual Inch/Metric Dials Dead Centers Q.C. Tool Post with 4 straight holders Steady Rest (1/2" – 4-1/2") Micro Carriage Stop 4-Position Bed Stop Coolant System One-Shot Lubrication Interlocking Chuck Guard Splash Guard	Leadscrew Cover Thread Dial Indicator Drive Plate Lathe Lamp T-Slotted Top Slide Electro-Magnetic Brake Chip Pan Chip Guard Tool Box & Manual
Return to Top of Page

Optional Equipment:
Face Plates Follower Rest (1/2" – 2-3/4") Rear Tool Post Round Tool Post Live Center	Handwheel Collet Chuck Lever Collet Chucks Taper Attachment Roller Fingers for Steady Rest ACU-RITE DRO
Return to Top of Page

Electrical:

208v.* / 230v. / 460v., 60Hz 3-phase

Please specify voltage when ordering.

*208v is a special order or optional transformer required

Return to Top of Page

Dimensions, Center Distance and Weight:

MODEL	A	B	C	CENTER DISTANCE	WEIGHT
C1340S	50.5"	37.5"	85.4"	40" St. Bed	2290 lbs.

Return to Top of Page

Recommended Chucks:

Chuck	Spindle Size	Dia.	Chuck
Atlas Easy-Set™ Universal 3-Jaw Scroll Chucks	D1-5 D1-5	6" 8"	EZ63D5 EZ83D5
Atlas Easy-Set™ Universal 6-Jaw Scroll Chucks	D1-5 D1-5	6" 8"	EZ66D5 EZ86D5
Atlas Medium Duty Iron Body 4-Jaw Independent Chucks	D1-5 D1-5	8" 10"	0844-10D5 1044-10D5

Return to Top of Page

Clausing Machine Tools in the Machine Shops of:

To Build a Winning Race Car... You Need Precision Machine Tools!
A Company.	Clausing Industrial, Inc. © 2005 1819 N. Pitcher Street Kalamazoo, MI 49007-1886 Phone: 800-323-0972 FAX: 269-345-5945	Service Center Goshen Indiana 811 Eisenhower Drive South Goshen, IN 46526 Phone: 800-535-6553 FAX: 574-533-0403
Last modified: February 22, 2007	Information in this document is subject to change without notice. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.