Clausing Metosa 14" Geared Head Lathes

Phone (800) 323-0972 for your nearest Clausing distributor

14" GEARED HEAD LATHE

Put the versatility of the dependable CLAUSING/METOSA 14" Lathe in your machine shop and watch your production increase year after year after year... Just Add Your Chuck and You’re Ready to Turn.

Dimensions, Center Distance & Weight

Recommended Chucks

Features:
Headstock & Control Panel: The 14" CLAUSING/METOSA Lathe is equipped with a two-speed spindle drive motor that drives a 9 speed, fully geared heavy-duty headstock giving you a total of 18 spindle speeds. All gears are hardened and ground and run in a continual bath of oil. The spindle is made of forged, quenched and tempered steel, with a case hardened spindle nose and mounted on precision taper roller bearings. The easy-to-operate control panel is designed for efficiency.	Bed & Bedways: The extra-wide scientifically designed bed, with tapered cross braces for fast and easy chip removal, is constructed of stabilized cast iron with bedways hardened and ground to a hardness of 42 to 47 Rc. The bed is mounted on a rigid, fabricated steel base that is specially engineered to absorb vibration and ensure smooth, accurate operation.
Return to Top of Page
Micro Carriage Stop: A standard feature on the 14" lathe, the Micro Carriage Stop, allows accurate positioning of the carriage.	4-Position Bed Stop: The 4-Position Bed Stop allows fast and accurate turning of multiple length; a standard feature on the 14" lathe.
Return to Top of Page
Carriage & Apron: Controls are designed for easy operation to ensure maximum productivity. Easy-to-read dual inch and metric dials, and a quick change tool post are standard equipment on the 14" lathe.	Tailstock: A heavy-duty casting design for maximum rigidity to support work pieces or tooling. The 1.9" ram, with 3MT taper, has a graduated scale and the handwheel ring is indexed for accurate ram positioning.
Return to Top of Page

Specifications:

14"
Capacity
	Swing over bed	14.17"
	Center height	7.1"
	Swing over gap	20.27"
	Gap length in front of face plate	4.72"
	Swing over carriage	13.2"
	Swing over cross slide	8.07"
	Bed Width	10"
Headstock
	Spindle bore	1.65"
	Spindle nose	D1-5
	Spindle taper	4MT
	No. of speeds (3 ranges in each motor speed)	18*
	Spindle speed range (rpm)	60-2000
Thread and feed box
	No. of longitudinal feeds	44
	Range (inches)	0.0018-0.026
	No. of cross feeds	44
	Range (inches)	0.0005-0.0076
	No. of Metric Threads	44
	Range (mm)	0.5-7.5
	No. of Inch Threads	44
	Range (t.p.i.)	4-60
	No. of modular threads	44
	Range	0.25-3.75
	No. of diametral	44
	Range	8-120
	Leadscrew dia./TPI	1.26"/4
Slides and carriage
	Cross slide travel	9.65"
	Top slide travel	4.72"
	Max. Tool Size	3/4" x 3/4"
Tailstock
	Tailstock ram diameter	1.9"
	Tailstock ram travel	5.51"
	Tailstock taper	3MT
Motors
	Spindle motor-2 speed (Hp)	3/4.5
	Pump motor (Hp)	3/4

*Spindle speed, (rpm)
30 - 46 - 60 -70 - 92 - 110 - 140
180 - 220 - 265 - 360 - 430 - 530
700 - 860 - 1000 - 1400 – 2000

(specifications subject to change without notification)

Return to Top of Page

Standard Equipment:
Dual Inch/Metric Dials Dead Centers Q.C. Tool Post with 4 straight holders Steady Rest (1/2" – 4-1/2") Micro Carriage Stop 4-Position Bed Stop Coolant System One-Shot Lubrication Interlocking Chuck Guard Splash Guard	Lathe Lamp Leadscrew Cover Thread Dial Indicator Drive Plate T-Slotted Top Slide Electro-Magnetic Brake Chip Pan Chip Guard Tool Box & Manual
Return to Top of Page

Optional Equipment:
Face Plates Follower Rest (1/2" – 2-3/4") Rear Tool Post Round Tool Post Live Center	Handwheel Collet Chuck Lever Collet Chucks Taper Attachment Roller Fingers for Steady Rest ACU-RITE DRO
Return to Top of Page

Electrical:

208v.* / 230v. / 460v., 60Hz 3-phase

Please specify voltage when ordering.

*208v is a special order or optional transformer required

Return to Top of Page

Dimensions, Center Distance and Weight:

MODEL	A	B	C	CENTER DISTANCE	WEIGHT
C1440S	50.5"	37.5"	85.4"	40" St. Bed	2328 lbs.
C1440	50.5"	37.5"	85.4"	40" Gap Bed	2328 lbs.

Return to Top of Page

Recommended Chucks:

Chuck	Spindle Size	Dia.	Chuck
Atlas Easy-Set™ Universal 3-Jaw Scroll Chucks	D1-5 D1-5 D1-5	6" 8" 10"	EZ63D5 EZ83D5 EZ103D5
Atlas Easy-Set™ Universal 6-Jaw Scroll Chucks	D1-5 D1-5 D1-5	6" 8" 10"	EZ66D5 EZ86D5 EZ106D5
Atlas Medium Duty Iron Body 4-Jaw Independent Chucks	D1-5 D1-5	8" 10"	0844-10D5 1044-10D5

Return to Top of Page

Clausing Machine Tools in the Machine Shops of:

To Build a Winning Race Car... You Need Precision Machine Tools!
A Company.	Clausing Industrial, Inc. © 2005 1819 N. Pitcher Street Kalamazoo, MI 49007-1886 Phone: 800-323-0972 FAX: 269-345-5945	Service Center Goshen Indiana 811 Eisenhower Drive South Goshen, IN 46526 Phone: 800-535-6553 FAX: 574-533-0403
Last modified: February 22, 2007	Information in this document is subject to change without notice. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.