|
Specifications
|
Capacity
|
|
Swing over bed:
|
34.6"
|
39.7"
|
44.6"
|
50"
|
|
Swing over cross slide:
|
24"
|
29"
|
34.25"
|
39.7"
|
|
Swing in gap:
|
53"
|
57.9"
|
63"
|
68.5"
|
|
Gap width from headstock:
|
23.6"
|
|
Center height over bed:
|
17.3"
|
19.85"
|
22.3"
|
25"
|
|
Center height from floor:
|
44.07"
|
46.67"
|
49.12"
|
51.77"
|
|
Center distance:
|
63" to 476" (see dimension & center
distance chart)
|
|
Maximum weight between centers:
|
8,800 lbs
|
|
Maximum weight with steady rest:
|
11,000 lbs
|
|
Maximum unsupported weight in chuck:
|
5,500 lbs
|
|
Small closed steady rest (optional):
|
1.5" to 15.75"
|
|
Large closed steady rest (optional):
|
13.8" to 27.56"
|
|
Follower rest (optional):
|
1.5" to 7"
|
Bed
|
|
Bed width:
|
22", with standard auxiliary guides:
25.5"
|
|
Bed height from floor:
|
26.77"
|
|
Leadscrew dia:
|
1.97"
|
|
Leadscrew/feed rod support:
|
On 122" and longer models
|
Headstock
|
|
Spindle bore on 34.6" swing:
|
6" standard, up to 14.17" optional
|
|
Spindle bore on 39.7", 44.6" and
50" swings:
|
6" standard, up to 16.14" optional
|
|
Spindle nose:
|
A2-11 to A2-28
|
|
Spindle speed range:
|
18 step manual gear change on 6.9" -
10.03" spindle bore models, 4 range auto change variable speed
with CSS on 12.51" and larger spindle bore models (optional on
6.9" - 10.03" spindle bore models)
|
|
Spindle speeds:
|
8-800 rpm 18 step manual gearbox, 4-1000 rpm auto
variable speed (see spindle and speed range chart)
|
|
Spindle drive motor:
|
30 hp standard
|
Carriage
|
|
Cross-slide travel:
|
26.4"
|
|
Compound rest travel:
|
17.7"
|
|
Tool Post:
|
4-way 8-position with T-slots
|
Tailstock
|
|
Quill diameter:
|
4.5"
|
|
Quill travel:
|
7.87"
|
|
Quill taper:
|
6MT
|
|
Bearing surface on bed ways:
|
19.75"
|
|
Tailstock movement:
|
Manual with saddle pin body movement
|
Due
to on going design improvements or customer requirements, design
and specifications are subject to change without notice.
|
|
Return to Top
|
|
Center Distance &
Dimensions
|
|
|
Center
Distance
|
63"
|
82"
|
122"
|
160"
|
200"
|
240"
|
|
Length
A
|
145"
|
165"
|
204"
|
244"
|
283"
|
322"
|
|
Base
width B
|
34.6"
|
34.6"
|
34.6"
|
34.6"
|
34.6"
|
34.6"
|
|
Overall
width C
|
71"
|
71"
|
71"
|
71"
|
71"
|
71"
|
|
Height
D
|
35"
swing - 54"
|
40"
swing - 56"
|
|
Weight
in lbs.
|
|
35"
swing
|
20,900
|
22,000
|
24,200
|
26,400
|
28,600
|
30,800
|
|
40"
swing
|
21,670
|
22,770
|
24,970
|
27,170
|
29,370
|
31,570
|
|
45"
swing
|
22,440
|
23,540
|
25,740
|
27,940
|
30,140
|
32,340
|
|
50"
swing
|
23,440
|
24,310
|
26,510
|
28,710
|
30,910
|
33,110
|
|
|
|
|
Center
Distance
|
279"
|
318"
|
358"
|
397"
|
437"
|
476"
|
|
Length
A
|
362"
|
401"
|
440"
|
480"
|
519"
|
559"
|
|
Base
width B
|
34.6"
|
34.6"
|
34.6"
|
34.6"
|
34.6"
|
34.6"
|
|
Overall
width C
|
71"
|
71"
|
71"
|
71"
|
71"
|
71"
|
|
Height
D
|
45"
swing - 59"
|
50"
swing - 62"
|
|
Weight
in lbs.
|
|
35"
swing
|
33,000
|
35,200
|
37,400
|
39,600
|
41,800
|
44,000
|
|
40"
swing
|
33,770
|
35,970
|
38,170
|
40,370
|
42,570
|
44,770
|
|
45"
swing
|
34,540
|
36,740
|
38,940
|
41,140
|
43,340
|
45,540
|
|
50"
swing
|
35,310
|
37,510
|
39,710
|
41,910
|
44,110
|
46,310
|
|
|
Return to Top
|
|
Standard Equipment
|
-
Chuck guard with limit switch
-
30 hp motor with star delta start on
6"/9"10" bore models
-
30 hp motor with inverter variable speed motor on
12" and larger bore models
-
18 step manual gear change on
6"/9"/10" bore models
-
4 range auto-change variable speed with CSS on
12" and larger bore models (optional on 6"/9"10"
bore models)
-
Auto power off with 2 adjustable position stops
-
Lockable main switch
-
Electrical cabinet ventilation fans
-
Electromagnetic spindle brake
-
6-way rapid traverse
-
6-way power feed
-
4-way 8-position tool post with T-slots
|
-
2 dead centers
-
1.97" leadscrew
-
Leadscrew /feed rod support on 122" and large
models
-
Steel leadscrew cover
-
Coolant system
-
Auto lube
-
Thread dial
-
QIK Threading system and A.P.I. threads
-
Manual tailstock with saddle pin body movement and
anti slip lock
-
Gears and bed ways hardened and ground
-
Traveling splash guard
-
Built-in air power supply tube
-
Halogen work light
-
Leveling screws and pads
-
Tools, toolbox, operation manual
|
|
Return to Top
|
|
Thread and Feed Range
|
|
Longitudinal feeds (in/rev)
|
0.0018-0.1
|
|
Cross feeds (in/rev)
|
0.0009-0.05
|
|
Longitudinal rapid feeds (in/min)
|
80
|
|
Cross rapid feeds (in/min)
|
40
|
|
No. of metric threads
|
60
|
|
Range
(mm)
|
1-56
|
|
No. of inch threads
|
60
|
|
Range
(TPI)
|
1/2-28
|
|
No. of module threads
|
60
|
|
Range
(MOD)
|
0.25-14
|
|
No. of diametral pitch threads
|
60
|
|
Range
(mm)
|
2-112
|
|
Leadscrew pitch (TPI)
|
2
|
|
|
Return to Top
|
|
Spindle Bore & Speed Range
|
|
Spindle Bore Size
|
6.02"
|
9.05"
|
10.03"
|
12.51"
|
14.17"
|
16.14"
|
|
Spindle Nose
|
A2-11
|
A2-15
|
A2-15
|
A2-20
|
A2-20
|
A2-28
|
|
Front Spindle Bearing
|
7.87"
|
12"
|
14"
|
15"
|
16.12"
|
19.25"
|
|
Speed Range #1 (rpm)
|
18-130
|
16-120
|
13-95
|
12-85
|
10-75
|
8-50
|
|
Speed Range #2 (rpm)
|
35-260
|
30-200
|
25-185
|
23-170
|
20-150
|
15-100
|
|
Speed Range #3 (rpm)
|
85-550
|
70-420
|
60-400
|
55-300
|
50-250
|
35-200
|
|
Speed Range #4 (rpm)
|
165-1000
|
150-700
|
120-600
|
110-400
|
95-350
|
65-300
|
|
18 Step Gear Box
|
|
Spindle Speeds (rpm)
|
8-11-15-19-25-35-50-68-87-100-120-145-215-320-410-480-620-800
|
|
*Optional 1000 (rpm)
|
10-15-19-25-31-43-65-85-105-130-150-180-270-400-500-590-780-1000
|
|
*Optional 1200 (rpm)
|
12-17-23-30-38-52-78-105-130-155-180-215-325-480-610-700-930-1200
|
*Optional
1000 and 1200 rpm 18-step gearboxes require refrigerated electrical cabinet.
|
|
Return to Top
|
|
Optional Equipment
|
-
Larger Swing, Longer Center Custom Models Available
-
‘CE’ Telemechanique electrics
-
40 hp spindle drive motor
-
Spindle bore up to 14.17" on 34.6" swing
and 16.14" on 39.7" swing and larger
-
4 range auto change variable speed with CSS for
6"/9"/10" bore models
-
Dual chuck adapter
-
Closed steady rest 1.5" to 15.75"
-
Closed steady rest 13.8" to 27.56"
-
Follower rest 1.5" to 7"
-
Full-length rear splash guard
-
Full guarding
|
-
Belt chip conveyor with cart
-
30" 4 jaw American type, ground, thick body
chuck
-
36" 4 jaw American type, ground, thick body
chuck
-
40" 4 jaw English type chuck
-
45" 4 jaw English type chuck
-
50" 4 jaw English type chuck
-
Special long jaws
-
Taper attachment
-
Full-length hydraulic profile cutting system
including semi-auto threading
-
Full-length tracer
-
Semi-auto threading
-
Micro stop
|
|
Return to Top
|
