|
Specifications
|
Capacity
|
|
Swing over bed:
|
50"
|
60"
|
70"
|
80"
|
|
Swing over cross slide:
|
35"
|
44.7"
|
55"
|
65"
|
|
Center height over bed:
|
25"
|
30"
|
35"
|
40"
|
|
Center height from floor:
|
54"
|
59"
|
64"
|
69"
|
|
Center distance:
|
93" to 487" (see dimension & center
distance chart)
|
|
Maximum weight between centers:
|
17,600 lbs
|
|
Maximum weight with steady rest:
|
22,200 lbs
|
|
Maximum unsupported weight in chuck:
|
9,900 lbs
|
|
Small closed steady rest (optional):
|
1.5" to 15.75"
|
|
Small open steady rest (optional):
|
1.5" to 15.75"
|
|
Large closed steady rest (optional):
|
13.8" to 27.56"
|
|
Large open steady rest (optional):
|
13.8" to 27.56"
|
Bed
|
|
Bed width:
|
40", with standard auxiliary guides:
45.7"
|
|
Bed height from floor:
|
29"
|
|
Leadscrew dia:
|
1.97"
|
|
Leadscrew/feed rod support:
|
On 132" and longer models
|
Headstock
|
|
Spindle bore:
|
6" standard, up to 24.02" optional
|
|
Spindle nose:
|
A2-11 to A2-28
|
|
No. spindle speed ranges:
|
4 auto-change variable speed ranges with CSS
|
|
Auto variable speed range:
|
4-1000 rpm (see spindle and speed range chart)
|
|
Spindle drive motor:
|
50 hp standard
|
Carriage
|
|
Cross-slide travel:
|
43.3"
|
|
Compound rest travel:
|
17.7"
|
|
Toolpost:
|
4-way 8-position with T-slots
|
Tailstock
|
|
Quill diameter:
|
9.25"
|
|
Quill travel:
|
7.87"
|
|
Quill taper:
|
6MT
|
|
Bearing surface on bed ways:
|
26"
|
|
Tailstock movement:
|
Hydraulic tailstock with rotating quill and
hydraulic body movement
|
Due
to on going design improvements or customer requirements, design
and specifications are subject to change without notice.
|
|
return to top
|
|
Center Distance &
Dimensions
|
|
|
|
Center
Distance
|
93"
|
132"
|
172"
|
210"
|
250"
|
290"
|
|
Length
A
|
215"
|
254"
|
293"
|
333"
|
372"
|
411"
|
|
Base
width B
|
49.6"
|
49.6"
|
49.6"
|
49.6"
|
49.6"
|
49.6"
|
|
Overall
width C
|
105"
|
105"
|
105"
|
105"
|
105"
|
105"
|
|
Height
D
|
50"
swing - 72"
|
60"
swing - 77"
|
|
Weight
in lbs.
|
|
50"
swing
|
36,740
|
42,240
|
47,740
|
53,240
|
58,740
|
64,240
|
|
60"
swing
|
38,940
|
44,440
|
49,940
|
55,440
|
60,940
|
66,440
|
|
70"
swing
|
41,140
|
46,640
|
52,140
|
57,640
|
63,140
|
68,640
|
|
80"
swing
|
43,340
|
48,840
|
54,340
|
59,840
|
65,340
|
70,840
|
|
|
|
|
Center
Distance
|
329"
|
368"
|
408"
|
447"
|
487"
|
|
Length
A
|
451"
|
490"
|
529"
|
569"
|
608"
|
|
Base
width B
|
49.6"
|
49.6"
|
49.6"
|
49.6"
|
49.6"
|
|
Overall
width C
|
105"
|
105"
|
105"
|
105"
|
105"
|
|
Height
D
|
70"
swing - 83"
|
80"
swing - 88"
|
|
Weight
in lbs.
|
|
50"
swing
|
69,740
|
75,240
|
80,740
|
86,240
|
91,740
|
|
60"
swing
|
71,940
|
77,440
|
82,940
|
88,440
|
93,940
|
|
70"
swing
|
74,140
|
79,640
|
85,140
|
90,640
|
96,140
|
|
80"
swing
|
76,340
|
81,840
|
87,340
|
92,840
|
98,340
|
|
|
return to top
|
|
Standard Equipment
|
-
Chuck guard with limit switch
-
50 hp motor with inverter variable speed motor
-
4 range auto-change variable speed with CSS
-
Auto power off with 2 adjustable position stops
-
Lockable main switch
-
Electrical cabinet ventilation fans
-
Electromagnetic spindle brake
-
6-way rapid traverse
-
6-way power feed
-
4-way 8-position tool post with T-slots
-
2 dead centers
-
1.97" leadscrew
-
Leadscrew /feed rod support on 132" and larger
models
|
-
Steel leadscrew cover
-
Coolant system
-
Auto lube
-
Thread dial
-
QIK Threading system and A.P.I. threads
-
Hydraulic tailstock with rotating quill, hydraulic
movement and anti slip lock
-
Gears and bed ways hardened and ground
-
Traveling splash guard
-
Built-in air power supply tube
-
Halogen work light
-
Leveling screws and pads
-
Tools, toolbox, operation manual
|
|
return to top
|
|
Thread and Feed Range
|
|
Longitudinal feeds (in/rev)
|
0.0018-0.1
|
|
Cross feeds (in/rev)
|
0.0009-0.05
|
|
Longitudinal rapid feeds (in/min)
|
80
|
|
Cross rapid feeds (in/min)
|
40
|
|
No. of metric threads
|
60
|
|
Range
(mm)
|
1-56
|
|
No. of inch threads
|
60
|
|
Range
(TPI)
|
1/2-28
|
|
No. of module threads
|
60
|
|
Range
(MOD)
|
0.25-14
|
|
No. of diametral pitch threads
|
60
|
|
Range
(mm)
|
2-112
|
|
Leadscrew pitch (TPI)
|
2
|
|
|
return to top
|
|
Spindle Bore & Speed Range
|
|
Spindle Bore Size
|
6.02"
|
9.05"
|
10.03"
|
12.51"
|
14.17"
|
16.14"
|
21.06"
|
24.02"
|
|
Spindle Nose
|
A2-11
|
A2-15
|
A2-15
|
A2-20
|
A2-20
|
A2-28
|
A2-28
|
A2-32
|
|
Front Spindle Bearing
|
7.87"
|
12"
|
14"
|
15"
|
16.12"
|
19.25"
|
23.5"
|
27.5"
|
|
Speed Range #1 (rpm)
|
18-130
|
16-120
|
13-95
|
12-85
|
10-75
|
8-50
|
6-40
|
4-25
|
|
Speed Range #2 (rpm)
|
35-260
|
30-200
|
25-185
|
23-170
|
20-150
|
15-100
|
12-80
|
8-50
|
|
Speed Range #3 (rpm)
|
85-550
|
70-420
|
60-400
|
55-300
|
50-250
|
35-200
|
30-180
|
20-140
|
|
Speed Range #4 (rpm)
|
165-1000
|
150-700
|
120-600
|
110-400
|
95-350
|
65-300
|
50-250
|
40-220
|
|
18 Step Gear Box
|
|
Spindle Speeds (rpm)
|
8-11-15-19-25-35-50-68-87-100-120-145-215-320-410-480-620-800
|
|
*Optional 1000 (rpm)
|
10-15-19-25-31-43-65-85-105-130-150-180-270-400-500-590-780-1000
|
|
*Optional 1200 (rpm)
|
12-17-23-30-38-52-78-105-130-155-180-215-325-480-610-700-930-1200
|
*Optional 1000 and 1200 rpm 18-step
gearboxes require refrigerated electrical cabinet.
|
|
return to top
|
|
Optional Equipment
|
-
Larger Swing, Longer Center Custom Models Available
-
‘CE’
Telemechanique electrics
-
75 hp spindle drive motor
-
Spindle bore up to 24.02"
-
Dual chuck adapter
-
Closed steady rest 1.5" to 15.75"
-
Closed steady rest 13.8" to 27.56"
-
Open steady rest 1.5" to 15.75"
-
Open steady rest 13.8" to 27.56"
-
Full-length rear splash guard
-
Full guarding
-
Belt chip conveyor with cart
-
40" 4 jaw ground, thick steel body chuck -
A2-15
-
46" 4 jaw ground, thick steel body chuck -
A2-15 to A2-28
-
50" 4 jaw ground, thick steel body chuck -
A2-15 to A2-28
|
-
60" 4 jaw ground, thick steel body chuck -
A2-15 to A2-28
-
70" 4 jaw ground, thick steel body chuck -
A2-15 to A2-28
-
80" 4 jaw ground, thick steel body chuck -
A2-15 to A2-28
-
30" 4 jaw American type, ground, thick body
chuck
-
36" 4 jaw American type, ground, thick body
chuck
-
40" 4 jaw English type chuck
-
45" 4 jaw English type chuck
-
50" 4 jaw English type chuck
-
Special long jaws
-
Taper attachment
-
Full-length hydraulic profile cutting system
including semi-auto threading
-
Full-length tracer
-
Semi-auto threading
-
Micro stop
|
|
return to top
|
