Clausing “Worksaver” HSS Circular Saw Blades for Ferrous Cutting

Blade No.	Size		TPI	No. of Teeth	Pitch
Blade No.	In.	mm	TPI	No. of Teeth	Pitch
CB99	10	250	10	320	2-1/2
CB100	10	250	8	250	3
CB101	10	250	6	200	4
CB102	10	250	5	160	5
CB103	10	250	4	128	6
CB104	10	250	3	100	8
CB105	10	250	2-1/2	80	10
CB98	11	275	10	350	2-1/2
CB106	11	275	8	280	3
CB107	11	275	6	220	4
CB108	11	275	5	180	5
CB109	11	275	4	140	6
CB110	11	275	3	110	8
CB111	11	275	2-1/2	84	10
CB122	11	275	2	70	12
CB112	12-1/2	315	8	300	3
CB113	12-1/2	315	6	240	4
CB114	12-1/2	315	5	200	5
CB115	12-1/2	315	4	160	6
CB116	12-1/2	315	3	120	8
CB117	12-1/2	315	2-1/2	100	10
CB118	12-1/2	315	2	80	12
CB119	12-1/2	315	1-1/2	70	14
CB125	14	350	8	350	3
CB126	14	350	6	280	4
CB127	14	350	5	220	5
CB128	14	350	4	180	6
CB129	14	350	3	140	8
CB130	14	350	2-1/2	110	10
CB131	14	350	2	90	12
CB132	14	350	1-1/2	80	14

All arbor holes 1.260" (32mm) with two pin holes. 8mm on 45mm dia. circle and with two pin holes 11mm on 63mm dia. circle and 4 pin holes 9mm on 50mm dia. circle. All blades special oxide coated for extend life. Thickness, 250 = 2.0mm, 275/315/325 = 2.5mm, 350 = 3.0mm.

Return to top

Carbide Tipped Circular Saw Blades for Aluminum and other Nonferrous Materials (FA models only)

Blade No.	Diameter MM (in.)	No. of Teeth	Teeth per Inch
MB-207	350 (14)	120	3
MB-208	350 (14)	108	2.5
MB-209	350 (14)	84	1.5
MB-210	350 (14)	48	1

Our Carbide Tipped Circular Saw Blades have triple chip grinds and 32mm Arbor holes

Return to top

Clausing Worksaver

Clausing Worksaver Blades are manufactured of the finest quality M2 steel available. These high speed steel blades are oxide treated to retain strength, hardness, and facilitate coolant penetration. They have a hardness of 63-65 RC.

A Diameter (specify)

B Pinhole size - 8mm on 45mm center (2ea.)

C Pinhole size - 11mm on 63mm center (2ea.)

D 32mm

Return to top

Spindle Speed, Blade Size - Surface Feet Per Minute

Spindle RPM